Commercial Laundry Solutions Since 1894


80 lb. On-premise Washer

  • Dry Weight Capacity:80 pounds (36.3 kg)
  • Cabinet Height:58 inches (147.3 cm)
  • Cabinet Width:34.39 inches (87.4 cm)
  • Overall Depth:45.38 inches (115.3 cm)

The Dexter Laundry T-1200 washer has a dry weight capacity of 80 lbs. The standard 6-cycle Dexter OPL washer control offers 6 pre-programmed cycles that are fully customizable. (WCVD models) Water levels, temperatures, bath times, spin length and injection sources can all be easily modified.

Also in the 80 lb. category Dexter Laundry offers our more advanced 30-cycle microprocessor controls which store up to 30 pre-programmed, easily modified cycles. (WCND models)

Product Features

Dexter on-premise washers are designed, tested and manufactured to ensure superior performance.


  • Heavy-duty bearings in a cast iron bearing housing
  • Welded steel spider and shaft
  • AISI 304 stainless steel top, front and side panels
  • Fits through a standard 36” doorway
  • 10 year washer warranty on the frame, tub, cylinder, shaft, seals, bearings & bearing housing
  • 3 year parts warranty


  • 100 g force extraction
  • 6 programmable wash cycles available
  • Perforated cylinders and raised baffles for superior wash action
  • Easy to modify cycle times, temperatures, water levels and injection source
  • Energy efficient inverter drive technology
  • Rugged frame design proven for over two decades
  • All Dexter washer designs pass 1000 hour out of balance test

Machine Specifications

For full specifications on the T-1200 80 lb. On-premise Washer, please look below.

Dimensions / CapacityStandardMetric
Dry Weight Capacity80 lb(36.3 kg)
Cabinet Height58.0”(147.3cm)
Cabinet Width34.39”(87.4 cm)
Overall Depth45.38’’(115.3 cm)
Door Opening18.5”(47.0 cm)
Cylinder Diameter30.0”(76.2 cm)
Cylinder Depth28”(71.2 cm)
Cylinder Volume11.5 cu.ft.(326.0 L)
Floor to Door Bottom18.5”(47.0 cm)
Speeds G-Force (RPM)
High Speed Extract100 G(485 RPM)
Intermed. Extract Speed60 G(375 RPM)
Washing Speed.9 G(43 RPM)
Net Weight - lb (kg)1060 lbs(480.8 kg)
Shipping DimensionsStandardMetric
Shipping Weight1099 lbs(498.5kg)
Height - in (cm)63”(160.0 cm)
Width - in (cm)36”(91.4 cm)
Depth - in (cm)52.14”(132.7 cm)
Water inlet Size3/4”(19 mm)
Flow Rate (per min)12 gal(45.4 L)
Pressure (min/max)10-130 psi(69-896 kPa)
Drain Diameter (O.D.)3.0”(7.6 cm)
Floor to Center of Drain9.0”(22.9” cm)
Electrical / Circuit Breaker / Running Amps / Wire SizeStandardMetric
-12 (208-240/60/1 - 2 wire + ground)20 amp / 8.4 amp / #12
-12 (208-240/60/1 - 3 wire + ground)20 amp / 8.4 amp / #12
-59 (230/50/1 - 2 wire + ground)20 amp / 8.4 amp / 3.5 mm2
Installation RecommendationsStandardMetric
Clearance Between Machines1/2” (min)(1.3 cm)
Clearance Behind Machines24” (min)(61.0 cm)
Concrete Thickness8” (min)(20.3 cm)

** Agency approvals may vary depending on configuration. Consult factory for details. For the most accurate information, please consult machine installation guide for all design and construction purposes. Due to continuous product improvements, design and specifications subject to change.

Product Manuals & Resources

Here you can download the complete owner’s manual, as well as product dimensions, instructions and maintenance tips for the T-1200 80 lb. On-premise Washer.